NRC/Mountings - Noise Reduction
Up to 1.00 NRC can be achieved depending on mounting style. Furring strips installed horizontally (when using
vertical panels) are recommended and should be a maximum of 24" o.c. when using 1"-thick panels.
- Tectum Correctional Interior Panels Acoustical (NRC) Data Download
- "A" Mounting
- "D-20" Mounting
- "C-20" Mounting
- "C-40" Mounting
- I-16 Tectum Correctional Interior Panel Installation Instructions (Coming Soon)
ASTM E-84 - Flame Spread/Smoke Developed
Tectum Interior Ceiling Panels - 0 Flame Spread, 0 Smoke Developed
Sizes & Finishes
Tectum Security Ceiling Panels are available in a 1" thickness with all four sides of the panel beveled, or a 1½" thickness with T&G detail on all four sides. Both thicknesses are available in 24" widths and lengths up to 96". Tectum Security Ceiling Panels are available in natural, painted white or custom colors, and can easily be field painted up to six times without losing their acoustical efficiency.
- 1" - 3.65 lbs./square foot
- 1½" - 4.55 lbs./square foot
- 2" - 5.50 lbs./square foot
- 1.75 per inch of thicknes
Tectum ceiling and wall panel measurements are plus or minus
1/8 - 1/4". Thicknesses are nominal. Panels that are to be butted must be beveled and will require field fitting or molding can be used to cover edges.
Tectum Acoustical Panels can be used over swimming pools and in open construction such as breezeways and open garages. They should not be installed where they will come in direct contact with water or condensation. Reveal edge panels (Tonico) should not be used for this purpose.
1" panels should not be used where the relative humidity will exceed 85%. Panels 1½" or thicker are not restricted by humidity conditions.
In all cases, the plenum must provide cross-ventilation to prevent condensation.