NRC/Mountings - Noise Reduction
- I-15 Tectum Designer Series Ceiling Panel Installation Instructions (Coming Soon)
ASTM E-84 - Flame Spread/Smoke Developed
Tectum In terior Ceiling Panels - 0 Flame Spread, 0 Smoke Developed
SIZES & FINISHES
Tectum Designer Series Panels are available 1”, 1 ½” and 2” thick. Designer Series Wall and Ceiling Panels are available in widths of 23 ¾” and 47 ¾” and lengths of 23 ¾” up to 95 ¾”. Designer Series Plus Ceiling Panels come in widths and lengths of 23 ¾”. Factory finish is in natural, painted white or custom colors and can easily be field painted without losing their acoustical efficiency. All are available in natural, painted white or custom colors, and can easily be field painted up to six times without losing their acoustical efficiency.
- 1" - 1.65 lbs./square foot
- 1½" - 2.55 lbs./square foot
- 2" - 3.50 lbs./square foot
- 1.75 per inch of thicknes
Tectum ceiling and wall panel measurements are plus or minus
1/8 - 1/4". Thicknesses are nominal. Panels that are to be butted must be beveled and will require field fitting or molding can be used to cover edges.
Tectum Acoustical Panels can be used over swimming pools and in open construction such as breezeways and open garages. They should not be installed where they will come in direct contact with water or condensation. Reveal edge panels (Tonico) should not be used for this purpose.
1" panels should not be used where the relative humidity will exceed 85%. Panels 1½" or thicker are not restricted by humidity conditions.
In all cases, the plenum must provide cross-ventilation to prevent condensation.