Fabri-Glass wall panels are easy to install. The panels are kerfed to receive a concealed H-spline which then fastens to the wall or other structure, depending on the type of mounting.
Fabri-Glass Décor Panels
Made with the same fiberglass substrate as Fabri-Glass wall panels and with the same wide choices of fabric colors, Tectum Fabri-Glass Décor Panels provide an excellent means of reducing unwanted sound in both new and existing spaces. Fabri-Glass Décor Panels are 1”-thick. The fabric is wrapped around all four edges. Impaling clips, Z-clips or other fastening techniques are at the option of the installer.
NRC/Mountings - Noise Reduction
Up to 1.00 NRC can be achieved depending on mounting style. Furring strips installed horizontally (when using
vertical panels) are recommended and should be a maximum of 24" o.c. when using 1"-thick panels.
ASTM E-84 - Flame Spread/Smoke Developed
Tectum Fabri-Glass Wall Panels - Class A\Class 1 (Component Tested)
Tectum Fabri-Glass Wall Panels (kerfed) are available in a 24" width and lengths of 48" up to 96". Tectum Fabri-Glass Décor Panels are available in a 24" width with 36", 48", 72" and 96" lengths. Fabri-Glass Décor is also available in a 48" width and 96" length panel.
- 1" - 0.50 lbs./square foot
- 4.00 per inch of thickness