Installation of 1” thick Kerfed Wall Panels is fast and economical. Mounting occurs using the concealed attachment method. By inserting the furnished vinyl splines into the kerf, then fastening the splines to the wall or other structure, you have successfully installed your Kerfed Wall Panel. For complete installation instructions and drawings, please visit our website, tectum.com.
NRC/Mountings - Noise Reduction
Up to 1.00 NRC can be achieved depending on mounting style. Furring strips installed horizontally (when using
vertical panels) are recommended and should be a maximum of 24" o.c. when using 1"-thick panels.
- Tectum Kerfed Wall Panels Acoustical (NRC) Data Download
- "A" Mounting
- "D-20" Mounting
- "C-20" Mounting
- "C-40" Mounting
- I-17 Kerfed Wall Panel Installation Instructions (Coming Soon)
ASTM E-84 - Flame Spread/Smoke Developed
Tectum Interior Wall Panels - 0 Flame Spread, 0 Smoke Developed
SIZES & FINISHES
Lengths from 2’ to 12’ with a width of 23 ¾" are available in a 1” thickness. Tectum Kerfed Wall Panels are available in natural, painted white or custom colors, and can easily be field painted up to six times without losing their acoustical efficiency.
- 1" - 1.65 lbs./square foot
- 1.75 per inch of thickness
Tectum ceiling and wall panel measurements are plus or minus
1/8 - 1/4". Thicknesses are nominal. Panels that are to be butted must be beveled and will require field fitting or molding can be used to cover edges.
Tectum Acoustical Panels can be used over swimming pools and in open construction such as breezeways and open garages. They should not be installed where they will come in direct contact with water or condensation. Reveal edge panels (Tonico) should not be used for this purpose.
1" panels should not be used where the relative humidity will exceed 85%. Panels 1½" or thicker are not restricted by humidity conditions.
In all cases, the plenum must provide cross-ventilation to prevent condensation.